Thursday 31 March 2011

"No" to more nuclear power. Free, clean, safe energy = Bessler's gravitywheel

The news that the Tokyo Electric Power Company will completely write off four of the six reactors at the crippled nuclear plant, suggests that the time is up for this expensive, potentially hazardous way of generating electricity. Many countries are reviewing their plans to build more 'improved' reactors and perhaps a halt will be called to further developments. I suggest that coal-fired electricity generators would be preferable to the nuclear option. I looked up the comparative costs of the options in the UK and found that one nuclear power station costs about £1.2b to build. A coal-fired one costs a little less at £1 billion. However the coal-fired one has the latest emmission cleaning technolog that reduces pollution to almost zero. The on-going cost of dealing with spent fuel rods from a nuclear reactor are almost limitless.

By comparison, an offshore wind turbine is rated at 3MW but only reaches about 40% of that capacity because of wind conditions. This means that you would need 1166 wind turbines to equal the output of a nuclear reactor! The cost of building them is estimated at £10.4b and would take up 406 square kilometers!

Why are we even considering wind power? It doesn't make economical nor ecological sense. Better to have coal fired power than the other options. However there is a snag. The cost in lives of coal mining is prohibitive and it is impossible to guarantee absolute safety even in the most advanced pits. So what's left?

What's the solution? There is one of course! Above these options Bessler's wheel would rein supreme as the
cleanest,cheapest, safest option.

Am I being presumptive and too naive in suggesting that such a system is even feasible let alone possible? No, the evidence that such a device was designed and built and demonstrated almost 300 years ago in Germany is so well established that it is regarded as a potential solution to the energy crisis in some quarters and is accepted as fact among a few in the higher echelons of the world of physics. We can, and must, continue our investigations into this phenomenon in order to present the world with this c lean, free, safe form of energy.

We have been taught that such a device, driven purely by gravity, is a violation of the laws of conservation of energy. Unfortunately there is an absolutely vast majority who continue to believe this and ignore the evidence. There is sound evidence that Bessler's wheel required no other force than gravity to drive it. What I find extraordinary is the lengths many of those who accept that Bessler's wheel worked, will go to, to explain why it works, summoning additional energies that in my opinion simply won't suffice. For me the truth is blindingly simple, gravity will do the job on its own and there is no conflict with the laws of physics. There is no need to imagine extra impetus from other forces, gravity will do the job. Bessler's wheel proves our teachers wrong and if it is wrong then it is up to we few who know the secret to build a working model, publish the how and the why and spread the information with all possible speed to stop any more of these toxic nuclear generators bringing forward the early demise of the human species not to mention the myriad other forms of life. It could happen.

JC

Thursday 24 March 2011

How many wheels? How long 'til success?

Someone emailed me recently asking how many wheels I had built. This is a hard question to answer, because you must first define what is a new design and what is a modification of a current design.

I've no idea how many wheels I've built over 36 years, but possibly over a hundred. I think I've modified every single one of them, by adjusting the lengths of levers, and increasing or decreasing the numbers of parts and adjusting the weights and altering the fulcrum points etc, etc. However the number of different designs or concepts by which each wheel was originally designed to work, must be fewer. I did sit down and try to draw rough diagrams of all the different designs I had built over the years but I gave up after I had done about 30 because I kept remembering others and some were so similar at first sight that I wasn't sure how or even whether, to define them as different. I guess that were between 80 and 100 completely different designs, but it could be more, I simply don't know.

In the end I came to the conclusion that I have built over a hundred and possibly two hundred wheels, none of which worked. I say none 'worked' and I mean that although some showed promise, none of them turned for more than about a minute.

The evidence that Bessler's wheel was genuine is so firmly established in my mind now that I cannot give up on my attempts to replicate it. It's like a puzzle that you turn over and over in your mind, you cannot solve it and yet you can't leave it alone, because it looks so simple, but must spend your waking hours worrying at it like a dog with a bone. You might think that I'd want to give up building the models by now, but this is unlikely to happen, unless I become incapable of building them. The truth is I feel as if I'm within a hair's breadth of success. This is because my own successes in decoding Bessler's hidden information has given me some very strong insights into the actual design of the mechanism. I have already worked out why it worked without coming up against the problem of the conservative force of gravity and I've given some strong hints at how this can be. I know that no one accepts my theories any more than I accept anyone else's. So...there is everything to play for and I am determined to prove I'm right by building a working wheel.

I know what has to be done to access the energy of gravity and if my latest model doesn't work I know how to adjust it to make it work. The design as it stands, is set to maximise the effect I have found - but within that design there is a negative reaction which may need reducing so that it doesn't overwhelm the excess force generated. I see it as a delicate balancing act to get just sufficient leverage without compromising the effect generated by the leverage.

I am well aware that there are dozens, perhaps, hundreds of others who share my feelings of confidence, so I'll just wish all of us good luck and hope that someone succeeds really soon.

JC

Friday 18 March 2011

My wheels are too small!

My efforts to replicate Besslers wheel have been delayed over the last couple of weeks by a medical emergency in the family but I'm back on it now. I had got fed up with constantly finding that my mechanisms got entangled with each other because I made them too large and/or placed them too close to each other. This is a problem that has beset me frequently in the past. However, I'm sure that if I place them slightly further out and therefore less close together this will not reduce their effect ... if they work!

To put it another way, if they would have worked where I originally placed them, then in theory they should work in the new position and the worst that might happene is a reduction in power. We'll see!

The reason it has taken me so long to make this change is due to my habit of using and reusing the same pieces of material to make the mechanisms even for different designs,and fixing them to the same size wooden discs. I had a several of these discs all the same size and the pieces of steel I used were also of a certain length and I only altered them reluctantly.

This crazy false economy led to the mechanisms often being just a little too large for the space they occupied, with the result that they frequently got entangled with the adjacent one or locked up. The various pieces are so full of holes anyway, that if I continue to use them, they will just fall apart, and this also applies to the wooden disc that everything is mounted on. I finally accepted that I needed everything on a bigger scale and with more space to operate.

It is probably thought that making the mechanisms the right size from the start is an obvious and simple thing to achieve, but the trouble is that usually I do not know how much leverage it will take to lift a weight for a particular design, until I build it, and then to discover that there is not quite enough room to accomodate the length of lever required, means either redesigning another part of the mechanism to reduce its size, or enlarging the space available by using a larger disc.

I had made a partial move towards new material but using the same sized disc still limited the space. I now have a much larger disc and I'm using some new aluminum and steel for the mechanisms and hoping that this time everything works without locking up. Of course it may not drive the wheel but at least it should operate as I designed it.

JC

Wednesday 9 March 2011

More Bessler findings at http://www.mikeyned.com/

I used to be in a small research group called called BORG, which stood Bessler Orffyreus Research Group. We thought we might succeed where others had failed in finding the solution to Bessler's wheel by trying to brain-storm a solution. For a while it was stimulating and exhilarating and we thought we might succeed, but as time went by, one by one, we began to drop out. The enterprise eventually ran out of steam and we went our separate ways. Unfortunately I lost everything to do with that episode due to a computer malfunction

One member of that group was a guy called Mikey Ned who has been a long time researcher into this subject. He has recently updated it at http://www.mikeyned.com/ and it has some interesting things to say about the measurement scales used in Bessler's drawings.
I have always been puzzled that no one appears to take any notice of Bessler's most widely known drawings. I refer to those which appear in Das Triumphirende. Each drawing has a purpose and they are stuffed so full of clues of an obvious kind, that it seems, to me at least, equally obvious that there are other clues of a more subtle kind.

I could mention for instance the presence of the pendulums (or pendula if you want the correct term). No witness ever recorded seeing them although they were mentioned by Bessler. Their presence was explained by a rather weak rationalsation which was really unnecessary. The reason for their presence is obvious to me even if it isn't to others. If you zoom in on a good scan of the drawings it is possible to see the great care taken with every line in each drawing.

It's interesting for me to see what someone else has posted about their own studies into this area of research because I sometimes think I'm the only one who has tried to make sense of the drawings which Bessler clearly laboured over. Those drawing are not just decorative they hold a wealth of clues and if we can only extend our knowledge of what is in them there is just a chance we can solve this puzzle that way instead of trying to do the way Bessler did, through a mixture of intuition and trial and error.
Good job, Mikey!
 
JC

The True Story of Bessler’s Perpetual Motion Machine.

On  6th June, 1712, in Germany, Johann Bessler (also known by his pseudonym, Orffyreus) announced that after many years of failure, he had s...